Looking for a Baby Bonnet Knitting Pattern? Find 16 Free and Cute Ones

Find a baby bonnet knitting pattern that you fancy. 16 patterns knitted flat, knitted in the round, knitted from the brim up, or from the crown down.

Find a baby bonnet knitting pattern that you fancy. 16 patterns knitted flat, knitted in the round, knitted from the brim up, or from the crown down.

A baby bonnet is a baby hat but unlike a baby hat or beanie, it has a soft head covering for babies that cover the hair and ears but not the forehead. It has a unique shape and is usually fastened to the head with cords. It is also not as tight a fit as a beanie. Even then, I think it provides more shade than a beanie even though it doesn’t have a brim.

I noticed 3 techniques frequently used to produce the distinctive shape of the bonnet:

  1. Knitted flat
  2. Knit in the round from the “brim” up
  3. Knit in the round from the crown down

My pick of patterns includes all 3 techniques. Besides the standard bonnet shape, there is also the pixie pointed top and the boxy shapes. 

Section 1: Baby Bonnet Knitting Patterns Knitted flat

1. Samantha’s Wee Newborn Fairy Bonnet

Samantha's Fairy Bonnet
Image source: the

This fairy bonnet is a quick project to knit up for a baby shower gift. It is basically a stockinette rectangle with a garter border on 3 sides. The tie cord comes with a flower and is attached to the bonnet by an eyelet.

Samantha’s blog itself contains the instructions and some work-in-progress pictures which I find helpful. She doesn’t specify the type of yarn to use except that it should be worsted weight yarn. Although no gauge was given,  she did give the measurement for the rectangle before seaming.

She crocheted the tie cord and flowers. Unfortunately, I don’t like to crochet. Thank goodness, she offers substitution – knitted i-cord and any small knitted flower.

This pattern is available at

2. Knitted Pixie Hat

Pixie bonnet
Image source: Diana Chan Taylor

This pixie hat looks like an elf’s hat. It is knitted flat and the shape is created because of the ribbing.

Although this pattern is listed in Ravelry, it is not available there. The actual pattern is now archived at the web archive. Crystal Palace Yarns claimed that they archived all their patterns in the Internet Archive after they retired the business. I hope the archive is permanent. (Alternative source: Crystal Palace Pixie Hat PDF)

The designer Diana recommends one skein of Crystal Palace Baby Georgia which is a 100% mercerized cotton yarn. Since Crystal Palace is no longer in business, the suggested substitution would be any type of yarn in fingering weight. The instructions are quite straightforward although it doesn’t include the gauge or the measurement of the finished product.

This pattern is available at

3. Lattice Bonnet

lattice bonnet
Image source:

This sweet bonnet is knitted flat and then seamed. The textured stitch featured on the bonnet is called the quilted lattice stitch. Like the Newborn Fairy bonnet, this is a knitted rectangle of quilted lattice stitch where one side is seamed up to form the bonnet.

The pattern includes 4 sizes: Preemie, Newborn, 3-6 months, and 6-9 months. Measurements for each size are given. Gauge is given as 25 sts and 35 rows to 4 inches in quilted lattice stitch.

The recommended yarn is Knitpicks’ Shine Sport Yarn which is a sport weight yarn with 60% Pima cotton and 40% wood fiber.

This pdf pattern is available at

4. Patty’s Adorable Baby Bonnet

Adorable Baby Bonnet
Image source: Patty Thomas at Ravelry

This adorable bonnet is basically a T-shape with the sides sewn together to form a cube-like bonnet. Cast on accordingly and start on the rim of the bonnet with ribbing. Transit to garter stitch for the body and back of the bonnet.

Suggested yarn is the O-Wool balance which is the worsted weight (9 WPI). 3 sizes are available: 0-3 months, 3-6 months, and 6 to 12 months.

This pattern is not professionally written with regard to the layout of the pattern. Other than that, I think it is easy to follow. This pdf pattern is available at

5. Amanda’s Baby On Board Bonnet

Baby On Board Bonnet
Image source: Cascade Yarns

This little boxy bonnet is fairly gender-neutral. It uses purl ridges as part of the pattern. The bonnet is boxy, like Patty’s Adorable T-Shaped bonnet.

It offers 2 sizes: newborn and 1-year-old. The finished item measures 15 and 18 inches in circumference respectively. The recommended yarn is Cascade Yarns Superwash Aran Splatter which is 100% superwash merino wool.

The instructions for decreasing the bonnet remind me of how a sock heel is knitted. There is an i-cord involved and here’s a video for quick reference.

The more I study this pattern, the more I like it. 🙂

This pdf pattern is available at

6. Franklin’s Baby Hood

Vintage Baby hood
Image source: Franklin at

This is a vintage A Cornelia Mee’s pattern dated 1844 adapted by Franklin Habit at

Knitted flat in three separate pieces which are then sewn together. A little more complicated than I like. The recommended yarn is Berroco Ultra Alpaca Light which is made up of 50% Super Fine Alpaca and 50% Peruvian Highland Wool. 2 skeins are needed. Gauge is 24 sts and 32 rows to 4 inches in stockinette stitch. Measurements are 9 inches high including frill.

Franklin’s instructions are quite detailed and I do not see any difficulties following them to knit the 3 pieces. I am not so sure about the sewing-up instructions. It is after all designed as a family heirloom so I guess it has to be awe-inspiringly difficult to make.

This pattern is available at

7. Vintage-Style Baby Bonnet by CraftFoxes

Baby bonnet hat finished
Image source: Vintage-Style Baby Bonnet by CraftFoxes

This is a vintage-style bonnet featuring a moss-like stitch texture for the cap. This is knitted flat and the instructions for the texture stitch are included within the instructions in Step 1.

The back shaping is achieved using an 8-stitch decrease. I like that Hadley Fierlinger, the designer included the number of stitches left on the needles after each row of decreases. It helps keep track of progress after each row and catches any mistakes early.

The last piece is the thin neckband. It is knitted as a separate piece and attached to the base of the cap where the button and buttonhole is.

The pattern offers 3 sizes with finished measurements and gauges. The recommended yarn is Sublime Baby Cashmere Merino Silk DK – Piglet (001) which is a double-weight yarn of 75% extra-fine merino wool, 20% silk, and 5% cashmere.

The pattern can be found in this book: Vintage Knits for Modern Babies by Hadley Fierlinger or from this web page.

8. Princess Charlotte’s Bonnet

Princess Charlotte's Bonnet
Image source: Sarah at Ravelry

This pattern is inspired by the one that Princess Charlotte, the daughter of Prince William and Catherine, wore when she first appeared outside the hospital. The little girl is already making a fashion statement. The 2 cables are fake cables. Learn how to make mock cables with this quick knit. ;P

The pattern offers 3 sizes: Newborn, 3-6 months, and 6 to 12 months. Gauge is 26 sts and 48 rows to 4 inches in garter stitch. No recommended yarn except that it should be fingering weight and you will need about 183m for the largest size.

The pattern calls for provisional cast-on and knowledge of picking up stitches. It isn’t really very professionally written, many terms are not standard. It seems that patterns with quirky construction tend to have awkward terms.

I think the instructions could be clearer. For one, it starts with the CO but doesn’t say what it is for. The neck, the brim, or a part that has no name. Of course, if I spend enough time staring, I might suspect that it is the section with the 2 mock cables.

It could also do with more work-in-progress pictures. This is one of those patterns I can’t visualize how it works just by reading the instructions. I must learn as I knit.

This pattern is available at

9. Knitted Cable Bonnet

Knitted Cable Bonnet
Image source:

The bonnet is secured to the head with a band and button. It has a nice cable band across the head and a ribbed band with a button to secure the bonnet to the baby.

This pattern has 3 sizes: 0-6 months, 6-12 months, and 1-2 years. Gauge is 22 sts and 28 rows to 4 inches in stockinette stitch. The recommended yarn is Sirdar Snuggly DK.

The pattern calls for the knitting of the cable panel first and then picking up stitches from the side of the panel to create the body and back of the bonnet. Pick up stitches from the other side to make the brim and button strap. Looks simple enough. 🙂

Need to know how to pick up stitches along the edge, here is a video for quick reference.

TECHknitter has a comprehensive write-up on picking up stitches:

This pattern is available at

10. Lotta’s I-Cord Bonnet

I-Cord Bonnet
Image source: Lotta Arnlund at Ravelry

One of the few patterns that start with an I-cord as well as an I-cord cast-on. I am not familiar with the I-cord cast-on technique and will need to check it out first.

It also calls for Kitchener graft stitch or a three-needle bind-off which I know.

Interestingly, the frills on the first section of the bonnet are made by using smaller needles for the garter stitch bands and bigger needles for the band within.

The patterns offer 4 sizes: 0-3 months, 3-6 months, 6-9 months, and 9-12 months. No recommended yarns except that it should be fingering, sport, or lighter DK that will satisfy the gauge of 23 stitches to 4 inches. That’s not very clear but Lotta, the designer did mention that the bonnet should be made to fit the baby it was made for.

This pattern is not written by a professional designer and English isn’t her first language so there are a few typos. But I think if I am not fussy, I should be able to make this bonnet with minimal difficulties.

This pattern is available at

11. Melissa’s Lacy Baby Bonnet

Lacy Baby Bonnet
Image source:

Melissa designed this lacy bonnet to match the baptismal gown she knitted for her niece. It has a picot edging, a lacy panel, and a baseband that fit nicely at the nape of the neck.

There is only 1 size. The gauge is 22 sts and 26 rows to 4 inches. The recommended yarn is Paton Silk Bamboo yarn.

She included a link to instructions for the rolled ribbon rosettes that she used as embellishments instead of assuming that people know how to do these.

Sections include Picot Edging (forming the brim), Bonnet body, a diagram of the bonnet laid flat, and showing the sides to be sewn up to shape the bonnet.

What I think is most clever about this pattern is the use of a 36-in long satin ribbon as the straps by threading it through the eyelet holes of the picot edging. How sweet.

This pattern is available at

12. Knitted Baby Balaclava

baby balaclava
Image source:

The official title of this pattern is the Baby hat knitting pattern. It doesn’t do the pattern justice. This bonnet has no straps, no buttons, no ribbons, no I-cords. Just pull it over the head of the baby or child, adjust, and WA LA!

This pattern has sizes from a 6-month old to a 4-year old. The recommended yarn is Bernat Softee Baby. Gauge is 21 sts and 40 rows to 4 inches in garter stitch.

Instructions are clear. Cast on starts at the face opening and the whole piece is knitted flat with increasing and decreasing stitches to shape the balaclava. The only sewing up is at the neckband.

This pattern is available at

Section 2: Baby Bonnet Knitting Patterns Knitted in the Round

13. Kate’s Alfalfa

Kate alfalfa bonnet
Image source: Kate Gagnon Osborn + Kelbourne Woolens

This bonnet has such a cute shape. It is similar to Diana’s pixie hat but is knitted in the round from the brim up and shaped with cleverly placed increases and decreases. I like the little pointy hat because it makes the baby looks like a little elf. It measures 7 inches high with a 12-inch circumference. Fits most babies from 4 to 12 months.

Kate recommends using the Fibre Company Terra yarn. It is the Aran weight (or 8 WPI or wraps per inch) with 40% baby alpaca, 40% merino wool, 20% silk. Gauge is about 20 sts and 27 rows to 4 inches in stockinette using 4mm needles.

The pattern is available as a Ravelry download and will be a pdf file. There are quite a bit of abbreviation and Kate has provided a web page to check these abbreviations. Sections include I-cord, Garter stitch in the round, Brim, Body.

I only have 2 complaints about this pattern:

1. The instructions for the body are presented in one big block with no breaks. She bold the rounds that are significant. If so, wouldn’t it be better to start each bold round with a new paragraph? I can, of course, copy the instructions into a word document and create the spacing myself.

2. She provided generic i-cord instructions at the beginning of the instructions without the cast on. For new knitters, this would have been confusing. It is only when you have come to the end of the pattern do you see that you are supposed to make two 4-stitch i-cords. I think it is better to co-locate the i-cord instructions.

This pattern is available at

14. Adrian’s Top-Down Bonnet

Totoro bonnet
Image source: Adrian Bizilia at Ravelry

The top-down bonnet is knitted in the round. Adrian uses the Turkish cast-on (called the Figure 8 cast-on in the pattern). It is most commonly used for toe-up socks because it creates a nice slightly curved top. Turkish cast-on is quite easy. Here’s a video by Jane Richmond showing how it is done.

Below is another video by Garnstudio Drops Design using the continental style.

For written instructions, Ambah has a written and photo tutorial on it.

The top-down bonnet pattern has 4 sizes: Newborn, baby, child, and adult (yeah!) Gauge is 6 stitches and 8 rows to 1 inch in stockinette stitch. The recommended yarn is any sport-weight yarn although the sample Totoro bonnet is made using Knitpicks Ambrosia in Fog which has, unfortunately, been discontinued.

The pattern is a basic top-down bonnet. There are no additional instructions on how to make the anime parts. The pattern is available on Ravelry as a pdf file. It is available in English, French, and Finnish.

This pattern is available at

15. Kris’ Dino Cap

Dino Bonnet
Image source: akatonbo at Ravelry

Imagination is such a powerful thing. A few little spikes on the top of a simple ear flap hat transform this cap into a dinosaur cap worthy of a little dinosaur fan.

The pattern has 3 sizes: Newborn, 2 years, and 3 years. The recommended yarn is Plymouth Encore Worsted. Gauge is 18 sts and 24 rows to 4 inches in stockinette stitch. Measurement for the finished cap is 14 inches for the newborn and 19 for the 3-year old.

The pattern uses short rows to shape the earflaps. Sections include: Lining and Earflaps, Joining the lining, Shape Crown, Spikes, and Braids. It is really one of the more interesting constructions I have come across for bonnets.

This dinocap pattern is available at

Section 3: Combination of Flat Knitting and Knit in the Round

16. Pure Stitches’ Bearly Bonnet

Pure Stitches Bearly Bonnet
Image source: Pure Stitches at Ravelry

Knitted in garter stitch flat in the beginning, the Bearly bonnet is later joined and knitted in the round to form the back of the bonnet.

The ears are knitted separately in 4 pieces and then sewn onto the bonnet afterward. Personally, I would avoid knitting 4 pieces of ears. I would use the Turkish cast on and knit the ears in the round (see instructions for this cast-on at ).

The pattern offers 4 sizes: 3, 6, 9, and 12-18 months. Suggested yarns are DROPS Baby Merino and DROPS Alpaca. Gauge is not properly listed.

The pattern is not professionally written because it doesn’t use standard terms and abbreviations. The assembly of the ears is quite detailed though.

This pattern is available in English and Danish at

I selected these 16 baby bonnet knitting patterns because of the different themes, designs, and knitting techniques.  I was surprised that there are more patterns that are knitted flat than knitted in the round.

If you like this list, you might also like my knitted baby hats list. 

92 / 100